Ford

This air bag suspension kit is specifically designed to allow you to customize your ride by adjusting the amount of air in each spring. This kit can solve many of your everyday problems, such as vehicle SAG, SWAY, and bottoming out.  Universal Fit
 
Features & Benifits

    2 Ply, Double convoluted rubber springs
    CNC machined annodized aluminum end caps
    Black powder coated mounting brackets
    Air adjustable from 5-100psi
    Clean, Easy Installation

Applications:

Chevy/GMC:

1968-1987 C-3500 (1 Ton 4x2)

1973-1987 C-1500, C-2500, C-10, C-20, C-30 (1/2 Ton, 3/4 Ton & 1 Ton 4x2)

Dodge:

1969-1993 D-150 4x2 (1/2 Ton 4x2 with Heavy Loads) (Lighter loads use Kit HP10033)

1969-1993 W-100, W-150 (1/2 Ton 4x4 with Heavy Loads) (Lighter loads use Kit HP10033)

1969-1993 D-250, D-350, W-250, W-350 (3/4 Ton & 1 Ton 4x2 & 4x4)

1994-2001 Ram 1500 (1/2 Ton 4x2 with Heavy Loads) (Lighter loads use Kit HP10033)

1994-2002 Ram 2500 & 3500 (3/4 Ton & 1 Ton 4x2 & 4x4)

Ford:

1966-1996 F-100, F-150 (1/2 Ton 4x4 with Heavy Loads) (Lighter loads use Kit HP10033)

1968-1996 F-100, F-150 (1/2 Ton 4x2 with Heavy Loads) (Lighter loads use Kit HP10033)

1969-1979 F-250 (3/4 Ton 4x2 Under 7,500 GVW)

1970-1997 F-350 (1 Ton 4x2)

1980-1996 F-250 (3/4 Ton 4x2)

1980-1997 F-250 (3/4 Ton 4x4, 1997 Heavy Duty Over 8,600 GVW)

1980-1997 F-350 (1 Ton 4x4, Except Super Heavy Duty Chassis)

1997-1998 F-250 Light Duty (3/4 Ton 4x2 & 4x4 Under 7,500 GVW)

1999-2004 F-350 Super Duty (1 Ton 4x2 11,200 GVW & Under)

1998-2010 Ranger (4x2 & 4x4) (Will only fit on Ranger pickups with stock wheels and tires)

Mazda:

1998-2010 Pickups (4x2 & 4x4) (Will only fit Mazda pickups with stock wheels and tires)

 

This kit mounts on the outside of the frame rails.

This kit DOES require drilling!!

This kit is compatible with the Reese 5th Wheel Rail Kit #30033, 30035 & 30729. This kit MAY NOT BE compatible with B&W Turnover Ball gooseneck hitches or any other aftermarket gooseneck or fifth wheel type hitches that mount on the outside of the frame rail. Please contact me prior to purchase if your vehicle has been lifted, has oversize tires or is equipped with any aftermarket accessory to confirm compatibility!!

Your air suspension kit may vary slightly in appearance from the ones pictured or described, depending on your application.

Includes Instructions With Full Factory Warranty

Pacbrake Air Springs and Air Bag Suspension was designed as a compromise between capability and comfort. If you haul heavy loads or pull a trailer, the rear springs can be pushed to the limit–resulting in excessive bounce, sagging ride height, and an overall feeling of instability. This system allows you to easily level out your truck’s stance for any towing / hauling situation with the ability to adjust the amount of air in each (bag) spring.

Fits: 1999-2016 Ford Super Duty F250 F350

Outside Frame mount

Drilling is Required

Will not fit vehicles with factory installed 5th wheel hitch

Fits: 2015 - 2018 Ford F150 (4WD)

Pacbrake Air Springs and Air Bag Suspension was designed as a compromise between capability and comfort. If you haul heavy loads or pull a trailer, the rear springs can be pushed to the limit–resulting in excessive bounce, sagging ride height, and an overall feeling of instability. This system allows you to easily level out your truck’s stance for any towing / hauling situation with the ability to adjust the amount of air in each (bag) spring.

Pacbrake has been in the business of building heavy-duty products for OEMs and the aftermarket for 50 years now, so introducing “just another air suspension” simply wouldn’t do. The air springs in Pacbrake air suspension systems are made from double convoluted two-ply rubber, and are the only air bags on the market with one-inch aluminum end caps and 18 support wires for maximum strength and durability.

Pacbrake Part Number: HP10135 Air Compressor & Air Suspension Simultaneous Activation Kit

This kit includes the HP325 12V Compressor, on/off activation switch, back lit single needle pressure gauge, powder coated mounting brackets, wiring, air hose & fittings and all necessary hardware.

Application:

Universal application for inflating and controlling the right and left air springs simultaneously (one switch for both sides)

Your air suspension activation kit may vary slightly in appearance from the ones pictured or described, depending on your application.

Includes Instructions With Full Factory Warranty

Pacbrake Air Springs and Air Bag Suspension was designed as a compromise between capability and comfort. If you haul heavy loads or pull a trailer, the rear springs can be pushed to the limit–resulting in excessive bounce, sagging ride height, and an overall feeling of instability. This system allows you to easily level out your truck’s stance for any towing / hauling situation with the ability to adjust the amount of air in each (bag) spring.

Fits: 2004-2014 Ford F150

Inside Frame mount

No Drilling is Required

The Pacbrake HP10098 AMP In-Cab Control Kit allows you to control the pressure in your Pacbrake AMP Air Springs with just the push of a button, from the driver seat in your truck! With an independent activation, this kit adjusts both air springs independently with a dual switched in-cab dash activation controller.
 

Features & Specifications:



    12V DC

    Independent Activation

    100% Duty Cycle (1 Hour @ 100 PSI), 1.2 CFM

    150 PSI Max Operating Pressure, Draws 18 Amps